Fandom

Retro Consoles Wiki

3DO FZ-10 Laser

175pages on
this wiki
Add New Page
Comments0 Share

The 3DO FZ-10 uses a Sanyo SF-92.5 laser. It has two ribbon cables: one has 4 pins and is about 6.5cm in length, and the other has 11 pins and is about 5.5cm. See the gallery below to understand how these measurements were made.

Locating a ReplacementEdit

The Sanyo SF-92.5 has reportedly been used in devices other than the 3DO FZ-10. It may be the same laser as in the FZ-1, but this has not yet been confirmed.

A few computer drives used the laser as well, including the Creative CR-563 and Creative CR-563B.

Apparently some variations of this laser exist as replacement components for some Mercedes vehicles, but the cable lengths need to be physically adjust to function properly. More information can be found in the related links.

Related repairsEdit

If the laser in your FZ-10 does not move back and forth, it may be because the lubricant on the rails on which the laser sits has dried and needs to be replaced. A guide explaining how to do this can be found here.

GalleryEdit

Related LinksEdit

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.